The default interface MTU in WAAS is 1500. You can adjust it in interface configuration mode. A more preferred approach would be to adjust the TCP MSS for the optimized connections. By default, WAAS will use the lesser of the MSS advertised by the client/server and 1432. If you have a need to manually adjust the TCP MSS, you can use the command:
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...