Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Multiple Instances on One server

I have a request to load balance multiple instances of an application on one server. This application would be run on two servers but the requirement is to load balance 3 instances of the same application (on different ports) on the same server.

How should I go about this? Is it all possible to implement this?

3 REPLIES
Cisco Employee

Re: Multiple Instances on One server

this is possible.

On the CSS, you can create different services using the same ip but different port

ie:

service A1

ip address x.x.x.x

port 80

service A2

ip address x.x.x.x

port 81

service A3

ip address x.x.x.x

port 82

On the CSM, you do the same inside the serverfarm.

ie:

serverfarm MYSERVERS

real x.x.x.x 80

real x.x.x.x 81

real x.x.x.x 82

Gilles.

New Member

Re: Multiple Instances on One server

does the keepalive port need to be the same as the service port for this example of 1 IP and multiple instances with different port numbers. the keepalive type is http.

thanks

Cisco Employee

Re: Multiple Instances on One server

the keepalive port will be the same as the port configured for the service/rserver unless specifically configured to something else.

You could reuse the same port for the keepalive but different port for the application.

But normally you would want to poll the ports that you are using.

Gilles.

116
Views
10
Helpful
3
Replies