Re: Multiple rserver ports, with L7 policies and stickiness
Many thanks for the response, once again.
A strange situation..
Solaris OS, multiple Zones where the server is running.
So, the real address is an address on a zone...
The default router has to be chaged on the Gloabal Zone on Solaris (versi0n 10).
All other zones appear to be fine using the ACE as the default gateway (default router in solaris terms).
Connectivity to the Zone we are Load Balncing too is intermitant (when we drop packets we see the MAC change from - 0014.4feb.5444 to 00.00.0c.07.ac.00 which shows up on the MSFC's as the HSRP MAC for VLAN 12 and 20 and on the ACE as gateway for VLAN 20.
Once the static ARP entry on ACE was added stability was restored.
Again, only this address on this Zone appears to be affected (six other addresses on this single server).
Any idea's? Running version 3.0.0_A1_6_3b on ACE's and can't find anything obvious in release notes. Upgrade?
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
Introduction Prepositioning is a powerful tools on the WAAS platform but
it is not always easy to figure out why your jobs are failing when
trying to retrieve the files.Here is a method that should help you to
figure out the reason why they are not succes...