04-05-2006 03:45 PM
Hi,
We have a situation where servers needs to be loadbalanced on same vlan and from different vlan as well.
We have figured out that from different vlan is simple to setup and works. Also we figured out that we need to do source NAT - 'nat client'using natpool to get the same vlan server loadbalancing.
For differenet vlans - uses no "nat client" on serverfarm.
For same vlan - uses "nat client pool-name" on serverfarm for destination servers and same for source / client servers.
But the real servers are same.
Is it possible to have same real servers in different serverfarms on the same VLAN?
Thanks
Sanjay
Solved! Go to Solution.
04-05-2006 11:16 PM
Sanjay,
you can put the same real in many different serverfarm.
This is not a problem and it is actually the solution to your problem.
Gilles.
04-05-2006 11:16 PM
Sanjay,
you can put the same real in many different serverfarm.
This is not a problem and it is actually the solution to your problem.
Gilles.
04-06-2006 02:59 PM
Thanks Gilles.
This clears my confusion about prosduction outage.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: