Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Multiple Servers In Same VLAN in the Serverfarm Loadbalancing

Hi,

We have a situation where servers needs to be loadbalanced on same vlan and from different vlan as well.

We have figured out that from different vlan is simple to setup and works. Also we figured out that we need to do source NAT - 'nat client'using natpool to get the same vlan server loadbalancing.

For differenet vlans - uses no "nat client" on serverfarm.

For same vlan - uses "nat client pool-name" on serverfarm for destination servers and same for source / client servers.

But the real servers are same.

Is it possible to have same real servers in different serverfarms on the same VLAN?

Thanks

Sanjay

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Multiple Servers In Same VLAN in the Serverfarm Loadbalancin

Sanjay,

you can put the same real in many different serverfarm.

This is not a problem and it is actually the solution to your problem.

Gilles.

2 REPLIES
Cisco Employee

Re: Multiple Servers In Same VLAN in the Serverfarm Loadbalancin

Sanjay,

you can put the same real in many different serverfarm.

This is not a problem and it is actually the solution to your problem.

Gilles.

Community Member

Re: Multiple Servers In Same VLAN in the Serverfarm Loadbalancin

Thanks Gilles.

This clears my confusion about prosduction outage.

117
Views
0
Helpful
2
Replies
CreatePlease to create content