I put a couple web servers behind the ACE and it appears to work. But I cannot get to the internet. I'm assuming I need to enable NAT on the ACE and I read the SCE Security Guide. If I enable NAT on ACE for my outgoing traffic, will it impact the number of simultaneous connections I can have to a virtual server?
i tried just added an input access list to vlan20 with permit ip all and I can ping out but not connect to any servers on port 80. When I traceroute my first hop is the msfc ip, not the ace ip. This makes me think that my packets are hitting the vlan20 interface on ACE then being passed to the MSFC on vlan 20 and then being NATed on the msfc which is not the desired behavior. Maybe i just need to adjust my understanding of the ACE. I am using one arm mode with a default gateway pointing to the ACE internal ip and routes for my internal network going to the MSFC. It appears to work from the outside but obviously I cannot access the internet from the load balacned server. I assumed I need to add NAT configuration to ACE to get this server to access the internet. I posted question to ask if I enabled NAT would it limit me in some fashion. For example, I have 10 servers load balacned behind a single external ip address. If I enabled NAT, would that limit me to 64K connections to all load balanced servers rather than 64K to each. Would the NAT traffic adversely impact the performance of the ACE? I would assume it would since NAT is rewriting packets...
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
Introduction Prepositioning is a powerful tools on the WAAS platform but
it is not always easy to figure out why your jobs are failing when
trying to retrieve the files.Here is a method that should help you to
figure out the reason why they are not succes...