Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Bronze

NATing outbound traffic from server

Currently we have configured CSM in bridged mode where 106.101.X.Y is our client as well as server side Vlan. Currently requests from clients at Virtual Server IP: 106.101.X.Y3 are distributed between Real Server IP 106.101.X.Y1 and 106.101.X.Y2. Now we want to make sure that when these Real servers at IP 106.101.X.Y1 and 106.101.X.Y2 originate their outbound requests, they should be NATed to one IP address: 106.101.X.Y4. What will be the required configuration for this?

3 REPLIES
Cisco Employee

Re: NATing outbound traffic from server

static nat 106.101.x.y4

real ...

real ...

Gilles.

Community Member

Re: NATing outbound traffic from server

Can you do static nat using the VIP as the NAT IP?

Bronze

Re: NATing outbound traffic from server

Gilles,

I tried this with no luck, still comes out with native IPs and does not translate. Any other recommendation?

131
Views
0
Helpful
3
Replies
CreatePlease to create content