The location regex that you enter must be a pure URL (for example, www\.cisco\.com) with no port or path designations if you are using SSL URL rewrite. If you need to match a path, use the HTTP header rewrite feature to rewrite the string.
No i was talking for redirection so you don't need NAT here since traffic is never given to any realserver but ACE itself redirects it. It shouldn't make any difference but worth a try if it is not working.
Also, i just noticed that you are using end to end SSL which means front and back end connections would be SSL, so why you have defined rserver with port 80 in serverfarm?
serverfarm host WWW_PORTAL_SFARM
rserver PORTAL-A 80-------------------->80 is for http, you should be using the port on which the server listens. If server listens on port 80 then it means that you cannot use end to end and hence you should remove SSL-PROXY CLIENT configuration from policy map.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...