Need help with accessing CSS 11503 with Perl scrip-t using Net::OpenSSH
I need help with accessing the CSS devices on my corporate network. As a test case I am attemting to access a CSS 11503 using a Perl script using the Net::OpenSSH package. Everything I have tried has failed. I can't even seem to complete the login process.
The version information from the CSS 11503 device as reported by the "show version" command is as follows :
Version: sg0820501 (08.20.5.01)
Flash (Locked): 07.20.2.06
Flash (Operational): 08.20.5.01
Licensed Cmd Set(s): Standard Feature Set
Secure ManagementVersion: sg0820501 (08.20.5.01) Flash (Locked): 07.20.2.06 Flash (Operational): 08.20.5.01 Type: PRIMARY Licensed Cmd Set(s): Standard Feature Set Secure Management
Does anyone have an example of a Perl script that uses the Net::OpenSSH module to access a CSS device ? Or maybe a location of some helpful documentation ?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...