Dear all!
I need to configure my new ACE appliance in bridged mode
my topology
Configure on ACE:
Context Admin
switch/Admin# show running-config
Generating configuration....
!
boot system image:c4710ace-t1k9-mz.A5_1_2.bin
!
interface gigabitEthernet 1/1
channel-group 1
no shutdown
interface gigabitEthernet 1/2
channel-group 1
no shutdown
interface gigabitEthernet 1/3
switchport access vlan 1001
shutdown
interface gigabitEthernet 1/4
switchport access vlan 1000
no shutdown
interface port-channel 1
switchport trunk native vlan 1
no shutdown
!
access-list ALL line 8 extended permit ip any any
!
class-map type management match-any remote_access
2 match protocol xml-https any
3 match protocol icmp any
4 match protocol telnet any
5 match protocol ssh any
6 match protocol http any
7 match protocol https any
8 match protocol snmp any
!
policy-map type management first-match remote_mgmt_allow_policy
class remote_access
permit
!
interface vlan 1000
ip address 10.104.10.19 255.255.255.0
access-group input ALL
service-policy input remote_mgmt_allow_policy
no shutdown
!
ip route 0.0.0.0 0.0.0.0 10.104.10.1
!
context Websphere
allocate-interface vlan 20
allocate-interface vlan 200
!
username admin password 5 $1$Ei88yeEz$CT5Gy5MCkewwUT/XCV5350 role Admin domain default-domain
username www password 5 $1$a.NWKsco$sOiUlxJdrdrYbkoobfr/d1 role Admin domain default-domain
!
ssh key rsa 1024 force
!
Context Websphere
switch/Websphere# show running-config
Generating configuration....
!
logging enable
logging timestamp
logging trap 5
!
access-list everyone line 8 extended permit ip any any
access-list everyone line 16 extended permit icmp any any
!
rserver host was01
ip address 10.104.20.33
inservice
rserver host was02
ip address 10.104.20.34
inservice
rserver host was03
ip address 10.104.20.35
inservice
!
serverfarm host Websphere
rserver was01
inservice
rserver was02
inservice
rserver was03
inservice
!
class-map match-all slb-vip
2 match virtual-address 10.104.20.36 any
!
policy-map type management first-match remote-access
class class-default
permit
!
policy-map type loadbalance http first-match slb
class class-default
serverfarm Websphere
!
policy-map multi-match client-vips
class slb-vip
loadbalance vip inservice
loadbalance policy slb
interface vlan 20
description "Client Side"
bridge-group 1
access-group input everyone
service-policy input client-vips
no shutdown
interface vlan 200
description "Server Side"
bridge-group 1
service-policy input remote-access
no shutdown
interface bvi 1
ip address 10.104.20.30 255.255.255.0
description "client - server bridge group"
no shutdown
ip route 0.0.0.0 0.0.0.0 10.104.20.1
!
It didn't work.
i can not ping to GW, server or VIP
plz help
