I have a brand new chassis with csm module it and i want to configure the csm using the gui, how can i launch the gui for csm?? i tried giving ip address to the switch and point to it from my pc through a browser after enable http server on the switch, but after authentication, i get page not found, do i need to do any thing more??
I've tried the CVDM for the csm. It work only with a patch and the CVDM is eol since 2005. It was not useful to configure or administrate the csm. In my opinion it is a good choice to configure the csm via cli.
I want to launch the device manager embedded in the CSM for managing it, I have a brand new switch and a new csm module, what do i need to do? I created a layer 3 iterface on the switch and coul ping it, I then pointed my browser to it and enabled http server on the switch,but still i can not see device manager page, plea help..
The files you can download from the cisco homepage are replaced by patched files, i've got these files only by my request. You have to extract these files for example in your bootflash, enable at least 6 vty lines (better 10) and the http server. Further you specify the path to the files with ip http path bootflash: command, your client need the Java Plug-in 1.4.2_06.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
Introduction Prepositioning is a powerful tools on the WAAS platform but
it is not always easy to figure out why your jobs are failing when
trying to retrieve the files.Here is a method that should help you to
figure out the reason why they are not succes...