The cahce engine has two interfaces, one one each switch. Both are configured to listen to incoming request and we are using l2-redirection.
The outgoing interface is configured as "ip wccp web-cache redirect out". The MSFCs don't support the "in" command.
We have recently upgraded our internet connection to a 30 MB pipe. The speeds we are seeing with the Content Engine in the network are significantly lower than when we take it out. When it is out, the download speed is close to the maximum (30 MB). Any ideas as to the cause of this?
Troubleshooting wise: We have disabled Websense and nothing improves.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...