can I combine network proximity with the load of CSS in every proximity zone?
For example: I have 3 proximity zones (Europe, Asia and America) - I use network proximity for choosing the best zone for any client DNS request. But I need the following rule: when the load in the zone Europe is 70% use the zone Asia, when the load in the zone America is 60% use these zones Asia and America. Is this method possible? I have to configure the KAL-AP keepalive between GSS and CSSs, haven't I? Thank you.
You will need to be running a version of 5.x code to get the Proximity/Global Load Balance functionality. You will also need the Proximity Database License Key to get the functionality.You can make sure you have the correct license key by contacting email@example.com .
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
With Vignesh R. P.Welcome to the Cisco Support Community Ask the Expert
conversation.This is an opportunity to learn and ask questions of Cisco
expert Vignesh R. P. about the Cisco® Nexus 7000 Series Switches and
support for the Cisco NX-OS Software platf...