Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Nexus 1010 internal state: active with WARM standby

This was displaying HA before I started tinkering with upstream VPC with LACP. Now I can not get HA back. Any thoughts and or suggestions?

Software

  loader:    version unavailable [last: loader version not available]

  kickstart: version 4.2(1)SP1(3)

  system:    version 4.2(1)SP1(3)

  kickstart image file is: bootflash:/nexus-1010-kickstart-mz.4.2.1.SP1.3.bin

  kickstart compile time:  7/8/2011 18:00:00 [07/08/2011 20:51:59]

  system image file is:    bootflash:/nexus-1010-mz.4.2.1.SP1.3.bin

  system compile time:     7/8/2011 18:00:00 [07/08/2011 21:16:25]

Nexus1010# sh redun statu

Redundancy role

---------------

      administrative:   primary

         operational:   primary

Redundancy mode

---------------

      administrative:   HA

         operational:   None

This supervisor (sup-1)

-----------------------

    Redundancy state:   Active

    Supervisor state:   Active

      Internal state:   Active with warm standby

Other supervisor (sup-2)

------------------------

    Redundancy state:   Standby

Error in getting supervisor and internal state of other supervisor.

System start time:          Fri Dec  9 01:18:50 2011

System uptime:              1 days, 19 hours, 25 minutes, 9 seconds

Kernel uptime:              1 days, 19 hours, 25 minutes, 32 seconds

Active supervisor uptime:   1 days, 19 hours, 24 minutes, 23 seconds

Everyone's tags (1)
1 REPLY
New Member

Nexus 1010 internal state: active with WARM standby

Never-mind. I broke it with LACP (possibly LACP and vPC). I have it back to square one. Now to figure out how to get LACP with vPC working. But, that's for another discussion.

Nexus1010# sh redund statu

Redundancy role

---------------

      administrative:   primary

         operational:   primary

Redundancy mode

---------------

      administrative:   HA

         operational:   None

This supervisor (sup-1)

-----------------------

    Redundancy state:   Active

    Supervisor state:   Active

      Internal state:   Active with HA standby

Other supervisor (sup-2)

------------------------

    Redundancy state:   Standby

    Supervisor state:   HA standby

      Internal state:   HA synchronization in progress

System start time:          Fri Dec  9 01:18:50 2011

System uptime:              1 days, 19 hours, 48 minutes, 23 seconds

Kernel uptime:              1 days, 19 hours, 48 minutes, 46 seconds

Active supervisor uptime:   1 days, 19 hours, 47 minutes, 37 seconds

769
Views
0
Helpful
1
Replies
CreatePlease login to create content