You can either configure box-to-box redundancy or VIP redundancy within the datacenter (locally) -- not both. Between the datacenters you use GSLB.
YOu mentioned that the easiest solution on the local level would be box-to-box, but could you use vip redundancy locally if you still wanted local services to be redundant within each datacenter? Basically, can you mix it so that you have some services redundant across datacenters, but other services redundant within datacenters?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...