Anyone have a scripted keepalive handy to help with having a CSS 11503 monitor an ASPX page and then notify a server administrator if the page becomes unavailable? Here's my sample service config:
<br />service aspx-server
<br /> ip addr 18.104.22.168
<br /> keepalive type http
<br /> keepalive uri â/serverpage.aspxâ
<br /> keepalive method head (default)
<br /> active
<br />I've previously used the global command âlogging sendmail (recipient ip addr) (mail server ip addr) (level of notification to receive)â, but I'd like to have this notification be more surgical in its delivery to a user/group mailbox, not a destination ip address.
I have done this - although recently it has started to misbehave slightly. In sniffing, it looks like OCCASIONALLY the CSS "forgets" to send the request, and then sends directed E-mail messages indicating a service is down because it didn't see the reply (which it isn't...).
Why do you need native HA: The native HA feature allows two Cisco DCNM
appliances to run as active and standby applications, with their
embedded databases synchronized in real time. Therefore, when the active
DCNM is not functioning, the standby DCNM will...
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...