I'm (East Coast) working with a colleague (West Coast) in cleaning up his LAN. Currently, he has no IP address space left on his LAN, and he also doesn't have a layer three switch.
To address these issues, we have created a L2 VLAN on his 5509, and I have configured a spare interface on his 2691 router to route traffic between this newly created VLAN and his existing IP saturated VLAN. We're using RFC1918 addresses for this new VLAN.
Now, IP routing works fine, but I'm thrown for a loop when I learn that this location has Novell services and the users that will be moved into this new VLAN will need to login to this Novell server from this new VLAN.
I'm told that the login error reads "Tree not found".
Does anyone know anything about this error and what the solution is?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...