We have rolled out the 512 wae's to the edges and 7326 wae's to the core and having an issue with a cad/cam app as it's very slow...Does anybody have any experience with "taming" a cad/cam app in the wae's?
If the files are accessed using a CIFS share, or via NFSv2 (neither sound like they are the case, but CAD/CAM applications typically involve accessing a file share), we can provide latency reduction, caching, and protocol optimizations, which dramatically increase performance of accessing packages and files contained within packages without compromising coherency. DRE will minimize the transfer of repeated chunks of TCP data and should be very effective with CAD/CAM files as they are uncompressed and contain repeatable sequences.
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...
Cisco Documents are usually accurate, but when it came to the document
on Cisco APIC Signature-Based Transactions it was slightly off the mark.
This document is for those novices to API like me who cant seem to
figure out how to go about performing signat...