Our buissness will fail if we could not solve this problem.
we have 1720 cisco router that has 2 WIC one is the backup to the other.we need to chick if the communication through one WIC to a specific router connected to it failed the other WIC could keep the route to the same router .how could we do this(what is the configuration?)and what is the suitable IOS that we could use?
The problem appears when we disconnect the connection from a far hop,the router don?t negotiate that (coz its interface still UP) and don?t switch to the alternative WIC.Please if you find a solution to this problem send it to me.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...