Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

port re-map 8080-80 and 8081-443 on CSS

I have a client that is looking for a load balancer either CSS or ACE. He wants to run his webservers on 8080 for http and 8081 for https, however he wants his users to be able to just go to the url using http or https. I am pretty sure the CSS can do this, I cannot find documentation that shows this.

2 REPLIES

Re: port re-map 8080-80 and 8081-443 on CSS

Thats Do-able on any platform CSS/CSM/ACE

In any case you need to define VIP listen on port 80 and then translate the requests to port 8080.

CSS Config example would be

content WEB-DBCONT

vip address 172.1.1.1

protocol tcp

port 80 ------ VIP Listening on port 80

add service APP1-SRVR1

add service APP1-SRVR2

active

service APP1-SRVR1

ip address 10.10.10.1

port 8080 ---- CSS translating request port to 8080

keepalive type http

keepalive port 8080

keepalive frequency 15

active

service APP1-SRVR2

ip address 10.10.10.2

port 8080 ---- CSS translating request port to 8080

keepalive port 8080

keepalive type http

keepalive frequency 15

active

HTH

Syed

New Member

Re: port re-map 8080-80 and 8081-443 on CSS

I thought that was the way to do it. I just couldn't find an example. Thanks very very much!

583
Views
0
Helpful
2
Replies