i get these messages from our edge wae device, they have various host ip's not sure what to make of it. there is no routing loop unless waas/wae is doing something that i am not aware of to cause that to happen. wae is in a seperate net from the users and the router. we are running 4.0.17 and wccpV2, the prepositioning and and cifs functions seem to be performing as advertised, print services are being phased out and moved back to core as we cannot seem to find a good driver set for the various printers at the site, but it seems unlikely that would be the issue anyway.
any ideas appreciated.
Message #1: [2008-05-23 15:27:10,101][ WARN] - Host 22.214.171.124:139 was not discovered, bypass period: 0 sec, number of events: 76, reason: possible routing loop
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...