i have a question : Is it normal, that whan i configure a serverfarm with a TCP or a HTTP probe, but no vserver associated with the serverfarm, the probe checking does not work ? All (2)Reals are operational (but the real state of one server is down). When i associate the serverfarm with a vserver the probes work.
You mean the vserver shows as "opertiona"? that would be true because one of the real is up in the serverfarm. I've setup tcp probes and assigned them to serverfarm without putting them on a vserver and it works fine. I use the serverfarm with probes just for monitoring purposes. You may want to check the server itself. I'm sure you figured it out by now..
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
Introduction Prepositioning is a powerful tools on the WAAS platform but
it is not always easy to figure out why your jobs are failing when
trying to retrieve the files.Here is a method that should help you to
figure out the reason why they are not succes...