I believe you need to setup an app session between the two CSS's and also add unique redundant indexes to each service and content rule. If my understanding is correct, the CSS uses APP to share flow state and redundancy information between the two CSS's, and the redundant index's keep the redundant services and content rules aligned.
For each service and content rule add 'redundant-index X' and add the same line on the corresponding service/content rule on the secondary CSS.
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...
Cisco Documents are usually accurate, but when it came to the document
on Cisco APIC Signature-Based Transactions it was slightly off the mark.
This document is for those novices to API like me who cant seem to
figure out how to go about performing signat...