Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problem with web management interface with cisco ACE 4700

I have two Cisco ACE 4710, in fault-tolerance. The master device automatically updates the backup device.

I have deleted from the console two old certificates (due to an issue got from a Vulnerability scan, which had detected the old certifcates on the balancer).

From the web management interface, I correctly see on the master device that the old certifcates do not exist anymore, but I still see them on the backup device. From console I see that theese certificates do not exist on both device.

So, on the backup device I see the correct configuration from console and a wrong configuration from web managment. If I try to manually remove the old certificates from the backup device, using the web management, I get an error. The message is that on the backup device the "configuration mode" is disabled.

 

What can I do? The vulnerability scan (I don't know why) still detects the old expired certifcates

1 REPLY
Cisco Employee

Hi,If you do telnet or ssh to

Hi,

If you do telnet or ssh to device and do sh crypto files, do you see the certificates? If yes, delete it from there.

Regards,

Kanwal

Note: Please mark answers  if they are helpful.

37
Views
0
Helpful
1
Replies
CreatePlease login to create content