Vlan address of server cluster is in the same subnet of that of the CSS. server's gateway is IP of CSS. My problem is when we do load testing on each server, it goes well with no errors. but when we do the load testing using the VIP address of the cluster, the load testing app gets a timeout when getting the flash content of the cluster.
my config on the content is:
vip address 192.168.8.4
add service SRV1
add service SRV2
add service SRV3
add service SRV4
Is there anything lacking in my content config that I need to do? Where else in the config do I need to look at.
Re: problems when load testing a cluster on CSS11501
Testing tool is outside the subnet/network. Only the particular file cannot be loaded. I haven't used any sniffer programs yet. Should I install it on one of the server in the cluster? What do I look for on the trace.
Sorry about this. I haven't used sniffer programs yet.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...