cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
457
Views
0
Helpful
1
Replies

Radius and WAP Load Balancing with IOS SLB

asepiacci
Level 1
Level 1

Hello.

We have a WAP Gateway architecture with three groups of servers that contain, each, a serverfarm of Wap Gateways and one Radius server (the three groups share the same VIP). We need the following behaviour: the Radius traffic that comes from the client (that points a VIP) is sent to one of the three Radius servers (round-robin). Then, the WAP traffic (type 1 or 2, that is WSP or HTTP protocol), that also points a VIP, is balanced across the WAP GW Servers of the same group of that Radius server. Is this possible with IOS SLB and how? Thanks a lot. Alessandro

1 Reply 1

fmeetz
Level 4
Level 4

If you are running hybrid code and that is not supported. The CAT needs to be running Native IOS for SLB.