Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Radius and WAP Load Balancing with IOS SLB

Hello.

We have a WAP Gateway architecture with three groups of servers that contain, each, a serverfarm of Wap Gateways and one Radius server (the three groups share the same VIP). We need the following behaviour: the Radius traffic that comes from the client (that points a VIP) is sent to one of the three Radius servers (round-robin). Then, the WAP traffic (type 1 or 2, that is WSP or HTTP protocol), that also points a VIP, is balanced across the WAP GW Servers of the same group of that Radius server. Is this possible with IOS SLB and how? Thanks a lot. Alessandro

1 REPLY
Bronze

Re: Radius and WAP Load Balancing with IOS SLB

If you are running hybrid code and that is not supported. The CAT needs to be running Native IOS for SLB.

203
Views
0
Helpful
1
Replies
CreatePlease to create content