I have a cisco 7606 with ios slb, and I have a server farm with two reals. The probe is ping and both are operational. What happen is that some time one of the reals goes in Ready_to_test, still the real is operational. I put one of the real no inservice, so the only real was the one with state Ready_to_test. I did the connection and everything goes ok , but if i do "show ip slb serverfarm name A det, the real results Ready_to_test.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...