Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

recommand two type of switchs...

I am gona buy workgroup switchs in 3days..I am confusing to choose ones.

The followings are required.

<<SWITCH 1>>

(packets switching over 38.7Mbps).

1.24ports.

2.FabricSwitch Bandwidth: 28Gbps

3.supporting 10/100/1000 Mbps Ethernet ports each(over 24 ports).

4.supporting 2GIBC ports( over 2 ports).

5. supporting 16MB Flash, 128MB DRAM.

6. Supporting Dynamic VLAN and Voice Vlan.

7. Supporting PVST+ and IGMPv3 snooping.

8. supporting Radius and TACACS+ Authentication.

<<SWITCH 2>>

(packets switching over 10.1Mbps).

1.48ports

2.FabricSwitch Bandwidth 13.6Gbps.

3. over 48 10/100 Ethernet ports

4. over 2 GIBC ports

5. 8MB Flash, 16MB DRAM

6. IEEE 802.1W(RSTP) and IEEE 802.1S(MSTP)

7. Supporting IEEE802.1x authentication.

8. Supporting traffic controling base on TCP&UDP and MAC.

Could U recommand me any switchs please........

1 REPLY
Cisco Employee

Re: recommand two type of switchs...

I think you came to the wrong forum for this question.

This group deals with content networking - in other words loadbalancing, caching,...

so we deal with CSS,CSM,Cache Engine, WCCP, ...

There is a lan-switching forum which would be more appropriate for this question.

Gilles.

126
Views
0
Helpful
1
Replies
CreatePlease to create content