Because I couldn't find any document describing how to manipulate the configuration on a SCA 11000, I wanted to ask whether a 'copy running-config tftp://servername/filename' is enough to backup the config (including certificates and keys). Can we restore the complete config on a new box with 'copy to running-config tftp://servername/filename' later ?
Yes. That should be sufficient to do a recovery. You can copy the running config from the SCA to the network (tftp/ftp/http) and save the certificates etc. as well. Later on you may use this config to do a recovery if required.
Moquery is the command line cousin of Vizore, it's very helpful and efficient sometimes during the troubleshooting. This article aims to provide moquery cheat sheet to the users for some most common seen scenarios.
Here is the checklist before customers/partners contact Cisco TAC:
Firmware Version of APIC and Switch
Download Switch and APIC techsupport logs
Problem description (Symptoms with details)
Business impact (eg, what kind of services...
moquery usageAPIC moquerySwitchmoquery
This document discuss a common issue observed during the VMM integration & VM workload migration to ACI fabric.
VMware Virtual machines are hosted in Cisco UCS-B seri...