Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Recovering a server in Testing mode with Local Director

I have a Local Director 417 connected to two servers, one of which is active and the other one is used only as backup. When the daemon of the active server is down (With the "show real" it appears first as "Failed" and then "testing" ) the backup server begins to accept requests.

But the former server keeps in Testing mode when the server recovers so if the second server fails, there is no active server to accept requests for clients although one of them is ready to do it.

Is there any parameter to adjust the time the server is in Testing mode in order to become In Service again when the server is up? I have stopped the service on the second server to force to send the client next request to the first server but it keeps on Testing.

1 REPLY
Bronze

Re: Recovering a server in Testing mode with Local Director

If it remains in testing after the server in question recovers, there is still something preventing it from passing the test. Have Cisco look over your config.

148
Views
0
Helpful
1
Replies
CreatePlease to create content