I have a pair of CSS11500 in redundancy mode across two sites. I have managed to get these working as a public shared service which sit on the dirty side of a pair of resillient firewalls so all services and vips need to be real address space. Can any one help me with the following issue....
Is it possible to have 2 content rules defined for one server so if they go to the url http://x.x.x.x they stay on the box but if they go to http://x.x.x.x/turkeyleg they get redirected to another server. Or would it be best to configure redirection on the server itself
Why do you need native HA: The native HA feature allows two Cisco DCNM
appliances to run as active and standby applications, with their
embedded databases synchronized in real time. Therefore, when the active
DCNM is not functioning, the standby DCNM will...
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...