Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Reduandant circuits in CSS

Gilles,

In box-box redundancy is it recommended to define redundancy on all the circuits in the CSS ?

As i want to manage the Master and Backup individually and to get the access for both Boxes i am not defining redundancy on Management circuit.

Please look in to the configuration and suggest me whether it is recommended or not.

Master device

interface 1/1

trunk

description "Trunk Client VLANs"

phy 1Gbits-FD-no-pause

vlan 410

vlan 440

vlan 816

interface 1/2

phy 1Gbits-FD-no-pause

bridge vlan 900

description "app session"

!************************** CIRCUIT **************************

circuit VLAN410

redundancy

ip address 200.200.200.69 255.255.255.192

circuit VLAN440

DESCRIPTION MANAGEMENT PURPOSE

ip address 10.25.230.8 255.255.255.128

circuit VLAN900

ip address 10.1.1.1 255.255.255.0

redundancy-protocol

Backup- device

interface 1/1

trunk

description "Trunk Client VLANs"

phy 1Gbits-FD-no-pause

vlan 410

vlan 440

vlan 816

interface 1/2

phy 1Gbits-FD-no-pause

bridge vlan 900

description "app session"

!************************** CIRCUIT **************************

circuit VLAN410

redundancy

ip address 200.200.200.69 255.255.255.192

circuit VLAN440

DESCRIPTION MANAGEMENT PURPOSE

ip address 10.25.230.9 255.255.255.128

circuit VLAN900

ip address 10.1.1.1 255.255.255.0

redundancy-protocol

Thanks in advance

1 REPLY
Cisco Employee

Re: Reduandant circuits in CSS

this is a standard practice to not configure redundancy on one circuit to allow remote access to the standby.

This is perfectly ok.

Gilles.

106
Views
0
Helpful
1
Replies