Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Redundant SCM processor does not boot in a CSS11506

Redundant SCM does not boot in a CSS11506

The boot file is as follows

!************************ BOOT CONFIG ************************

primary boot-file sg0810107s

primary boot-type boot-via-disk

passive primary boot-file sg0810107s

passive primary boot-type boot-via-disk

The following commands were entered to sync the ios, configs and boot file

passive sync boot-config

paasive sync startup-config

passive sync image

Is there anything else I need to configure to make it work or is there an issue with sg0810107s?

4 REPLIES
Cisco Employee

Re: Redundant SCM processor does not boot in a CSS11506

what do you mean the redundant scm does not boot ? It will only boot if the primary SCM fail.

Gilles.

New Member

Re: Redundant SCM processor does not boot in a CSS11506

Hi Giles,

We simulated a failure by removing the primary SCM in slot 1 and the CSS rebooted but the standby SCM did not boot. We had to reseat the PMCIA flash disk in the standby SCM to boot it properly

Pravin

Cisco Employee

Re: Redundant SCM processor does not boot in a CSS11506

so you're all set ?

Gilles.

New Member

Re: Redundant SCM processor does not boot in a CSS11506

Yes, thank you..

220
Views
0
Helpful
4
Replies
CreatePlease to create content