If we are configuring ACE in HA mode Primary/Standby in that case what would be initial configuration required on secondary unit. Also another question if device is already configured in HA mode and want to add one more vlan interface on primary -how does it configure interface configuration in reverse order auto or manually ? one more related question if the running secondary unit fails what would replacement procedure in terms of configuration.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...