I am deploying a proof of concept with WAAS v.4.1.3a and am having a problem with the remote WAEs.
I have the CM running and the host WAE is registered using WCCP. The remote WAE will not register to the CM. They can all ping each other, but when I type in CMS enable on the remotes they hang for a long time then error out. I have tried applying the management IP on the in-line NIC as well as the Gig 1/0 interface. Neither way makes any difference. Any ideas?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...