Hi all, just have a question about som reuse of resources in a ACE module context. I don't want to make a new context, and can reuse most of the existing configuration in one of my context. The config is not complex and difficult, but I'm not sure if I can do this.
The primary goal is to loadbalance 2 webservers with a new vip, new serverfarm, stickygroup, policy-map and different nat-pool.
Since I haven't decided the ip addresses to be used, they are just xx in the config below.
The changes I want to implement are in bold. Will this work for me?
There is no problem in having multiple VIPs in one single context.
The configuration for it would more or less be the one you sent, except for one point. In a sticky group, you can only use one single serverfarm, so, you will need to create a second sticky group for the new VIP. This also implies that you will also need a second load-balance policy associated to the new sticky-serverfarm.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
With Vignesh R. P.Welcome to the Cisco Support Community Ask the Expert
conversation.This is an opportunity to learn and ask questions of Cisco
expert Vignesh R. P. about the Cisco® Nexus 7000 Series Switches and
support for the Cisco NX-OS Software platf...