Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Routing in Cisco CSS

Hi Friends,

I am facing some issues with routing on Cisco CSS. My requirement is that i want to make internal subnets accessible from external network(firewall).

Please have a look at the diagram, i want to reach 10.87.12.0/24 and 10.87.16.0/24 subnet reachable from firewall. CSS is configured in routed mode.

Thanks,

Sarab

3 REPLIES
Cisco Employee

Re: Routing in Cisco CSS

what's the concern ??

The CSS will route by default all traffic if not denied by an ACL.

Gilles.

Community Member

Re: Routing in Cisco CSS

Hi Gilles,

That is the problem i am facing that it is not routing the traffic. I tried this by disabling ACLs also. I am not very good in CSS, so don't know if i have configured something wrong. Please have a look at current configuration.

Cisco Employee

Re: Routing in Cisco CSS

do a 'show circuit' make sure the interfaces are up.

If they are, your CSS is routing and the problem is somewhere else.

Make sure the servers have a default gateway pointing to the CSS.

Gilles.

143
Views
0
Helpful
3
Replies
CreatePlease to create content