I've never had a downgrade fail, but I did have an upgrade fail where the SSL-R (SonicWall equivalent of the SCA11000) would only boot into MiniMax mode.
SonicWall provided a doc on copying code with netcat to the device. I don't see this doc on the Cisco site, but here's a link to the MiniMax command reference. Depending on the version you have installed, not all commmands listed in the doc may exist on your version.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...