1)You could create a new key and a new certificate request in order to get another certificate for the new SCA. Most Certificate Authorities require that you pay for every machine that will contain the cert regardless if you are using the same cert and key. The purchase of this additional cert may put you in compliance with that agreement if you were not already (assuming your CA has this requirement).
2)You could contact your CA and revoke the present certificate and re-submit a certificate request. This may be the least expensive option. Regarding the problem with the PEM certificate, the usual problem is that the password or the passphrase was not correctly entered, or not entered at all. You may check details of how to do that at:
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...