We have a routed mode deployment for web based application. Config works fine and users get the login page, but the web application server relies on an external authentication for end user authentication. Since the servers are having LB as the default gateway and its not running any L3 routing server generated traffic is failing with no return route. Any suggestions.
I would guess the same about routing. Check from the auth server that you can reach the ACE and the network in VLAN 30. Another point is ip normalization. Check if the generated traffic is returning on the same interface as it left the ACE.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...