I have servers in three vlans all configured on a pair of 6509 with CSMs. I would like to set the CSMs in routed mode and have a client VLAN for users to access a VIP for the web servers. The web servers (say in vlan 10) would connect with an application server VIP, the application servers would be in VLAN 20, those servers will have a VIP to connect to a set of DB servers in VLAN 30.
Question is this, do I set up a client side VLAN for the application and DB servers? These servers will only be accessed by the other servers and not by the general user population. I am thinking I need 3 client side VLANS (11, 21 and 31) on the outside of the CSM. What routing issues would this create?
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...