10-06-2010 07:48 AM
We use a Serverfarm redirect for sites we require to use SSL. The rserver redirect is configured with variables for the hostname (%h) and uri (%p) as follows:
serverfarm redirect SSL
rserver SSL
inservice
rserver redirect SSL
webhost-redirection https://%h%p 302
inservice
That serverfarm is the default class for the load balancing policy for class maps using tcp port 80.
The problem is that the current connections for the serverfarm keep incrementing. My concern is that once this increments to 4,000,000 the serverfarm will no longer accept any connections.
I have cleared the connections to the serverfarm and that changes the total connections, but does nothing to the current connections.
Attached file has sho serverfarm SSL detail output.
Thanks in advance for any and all replies.
10-06-2010 08:08 AM
What version do you run ?
That sounds like a counter bug.
Do a show conn to verify if you have that amount of connections established or not.
If not, upgrade to the latest version as there were fixes in this area of the code.
If problem persists, open a service request with the TAC to report the problem,
Gilles.
10-06-2010 08:26 AM
We are running version A2(2.4). Thanks.
10-06-2010 08:28 AM
My apologies...I have run a sho conn and those connections are not in the connection table. However, my concern is more with the way that the serverfarm manages its allowed connections, with 4,000,000 being the max number of connections per serverfarm. Thanks.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: