I am currently using a CSS-11500 serie in a large environment. Load balancing is based on actual server CPU load, mesured by a VBS script that then set the "apSvsLoad" MIB variable in the CSS for the corresponding service. This works perfectly. Now, we plan to change the CSS though CSM modules in a Catalyst 6500. My question is : what is the equivalent MIB variable to set into the CSM to achieve the same result as with the CSS ?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...