Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Setting up clock on CSS11506

Hello,

I currently have our CSS device polling for time information from our time servers. The issue is that when you do a show clock it reports the UTC time (6 hours ahead of DST Time).

Can someone provide me the statements which enable the time to display in DST (Day Light Savings Time).

Thank You,

Adil Nasser

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Setting up clock on CSS11506

3 REPLIES

Re: Setting up clock on CSS11506

Community Member

Re: Setting up clock on CSS11506

I tried to use the commands mentioned at the url above but they don't work because it is a standalone CSS and it doesn't have IOS. The OS is as follows:

Version: sg0810106 (08.10.1.06)

Flash (Locked): 08.10.1.06

Flash (Operational): 08.10.1.06

Type: PRIMARY

Licensed Cmd Set(s): Standard Feature Set

What is the command for setting DST time using the command set in the standalone CSS device?

Adil Nasser

Community Member

Re: Setting up clock on CSS11506

I was able to successfully configure the correct time and DST using the information resource using the link you provided.

Thank You Syed.

For all others who want to see the command used to do this see below:

CSS11503# clock summer-time EDT recurring

CSS11503# clock timezone EST hour 5 after-UTC

163
Views
0
Helpful
3
Replies
CreatePlease to create content