Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

Sharing a VLAN between FWSM and ACE (Routed Mode)

Anybody in here with experience on sharing a Vlan between an ACE and a FWSM module?

I have a transfer network between the ACE and the FWSM in the same chassis. FWSM gets several vlans and ACE gets some Vlans.

I wanted to configure it like this.

firewall vlan group 10 <FWSM only vlans>

firewall vlan group 20 <shared FWSM and ACE vlan>

or

svclc vlan group 20 <shared FWSM and ACE vlan>

svclc vlan group 30 <ACE only vlans>

The design hides the client side network and the server side network for the ACE behind the FWSM module.

Layout:

|-- Clients <--> MSFC <--> FWSM <--> ACE <--> Server --|

So allocation on the 65xx would be like this.

firewall module n vlan-group 10,20

svclc module n vlan-group 20,30

Any obvious issues with this design if you share the vlan(s) referred in group 20 with both modules?

FWSM and ACE will be in routed mode.

Thanks for reading...

Roble

2 REPLIES
Bronze

Re: Sharing a VLAN between FWSM and ACE (Routed Mode)

huh
New Member

Re: Sharing a VLAN between FWSM and ACE (Routed Mode)

Roble,

I'm having same question. Could u repost the link? It seems invalid now.

855
Views
0
Helpful
2
Replies