cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
253
Views
0
Helpful
1
Replies

Simple SLB with the ACE Module

Sbutzek
Level 1
Level 1

Hello,

i have some problems with a ACE module i am currently tesing.

I have a simple Serverfarm with two Servers.

But there seems to be some Problems with the Loadbalancing i not understand:

1) I use Round Robin, but the ACE seems to put me serval times to the same server. I notice this, because i have different content on both servers, also different URLs.

2) withz the show serverfarm statement the total connects do not increment.

switch/slb-c1# show serverfarm webfarm

serverfarm : webfarm, type: HOST

total rservers : 2

---------------------------------

----------connections-----------

real weight state current total

---+---------------------+------+------------+----------+--------------------

rserver: web1

10.0.33.201:0 8 OPERATIONAL 0 0

rserver: web2

10.0.33.200:0 8 OPERATIONAL 0 0

switch/slb-c1# show service-policy L4_LB_VIP

Status : ACTIVE

-----------------------------------------

Interface: vlan 300

service-policy: L4_LB_VIP

class: L4_VIP_CLASS

loadbalance:

L7 loadbalance policy: L7_SLB_POLICY

VIP Route Metric : 77

VIP Route Advertise : DISABLED

VIP ICMP Reply : ENABLED

VIP State: INSERVICE

curr conns : 0 , hit count : 15

dropped conns : 0

client pkt count : 10198 , client byte count: 420991

server pkt count : 23367 , server byte count: 34915173

I have attatched the Config.

Any Idea what is going on?

1 Reply 1

Gilles Dufour
Cisco Employee
Cisco Employee

what version do you have ?

I would recommend to run the very recent A1.4.

This is something that really should work.

Gilles.