Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

SLB Application Processor Complex

I have a WS-X6066-SLB-APC module in my 6500.  I have a 2nd one in another 6500 and need to replicate these.  I understand there are some commands to get this working and I'm told some of this is automated.  Can anyone point me to links on procedures to enable this?

regards,

mike

1 REPLY
Cisco Employee

Re: SLB Application Processor Complex

If you are configuring the second CSM to be part of a redundant pair

you configure config sync , instructions for this are at:

http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/csm/4.2.x/configuration/guide/redun.html

You need 4.2 code on CSM and min of 12.2(18)SXF6 on cat.

1243
Views
0
Helpful
1
Replies
CreatePlease to create content