Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SLB not working

When I put the one of the real servers in outofservice mode, slb works. But when I put the server switchport to shutdown to simulate server down, slb does not work. It keeps on trying to look for the server that it last established the session with and it does not look for the other real server in the serverfarm.

1 REPLY
Silver

Re: SLB not working

The addition of new physical (real) servers, and the removal or failure of existing servers, can occur at any time, transparently, without affecting the availability of the virtual server. The slow start capability of IOS SLB allows a new server to increase its load gradually, preventing failures caused by assigning the server too many new connections too quickly.

IOS SLB supports fragmented packets and packets with IP options, buffering your servers from client or network vagaries that are beyond your control.

128
Views
1
Helpful
1
Replies