cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
457
Views
0
Helpful
1
Replies

SNMP issue with redundant CSS11000

stuffa
Level 1
Level 1

We have two CSS11154's in an master/slave configruation. There is only one unique address on each of the switches, we are addressing snmp polls to these addresses. The slave/secondary switch responds correctly, however the Master responds to the snmp polls with the IP address of the closest interface.

understandably, the replys are not heard.

I checked all of the litrature, and I am unable to find anything that references this issue. Has any one else run into it, or know of a S/W release in which it has been fixed (I am sure that this is a bug)

Cheers

Chris M

1 Reply 1

ciscomoderator
Community Manager
Community Manager

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: